RCM differential pressure flowmeter in the United States 
 Product Name: RCM differential pressure flowmeter (without power) 
 The liquid gas directly read the data flow meter 
 The Flo-Gage direct reading flow meter: 
 RCM Flo-Gage, in engineering units (such as: GPM, SCPM is, 1 / m) with large, easy-to-read dial direct reading flowmeters. The Flo-Gage is based on the built-in scale nozzle pressure differential to measure the flow. The flowmeter is a complete type of independent, does not require any external power connector, detachable nozzle, or blocking, filtering and balancing valves. 

 The Flo-Gage is applicable to water, oil and most other low viscosity, sedimentation and the measurement of liquid compatible with the component materials. The Flo-Gage is also applicable to the measurement of compressed air, oxygen, carbon dioxide and many other non-toxic compressed gases. (See option) the product can also measure the saturated steam, measuring the highest table pressure of 120 pounds / square inch. (Option K) 
 The Flo-Gage can be connected with a current output or frequency output transmitter for remote indication or sum. The Flo-Gage also be in contact with the reed switch connected to indicate the high and low flow. 
 Application: 

 The Flo-Gage flowmeter is designed for industrial applications, durability and stability is an important factor in the process of industrial applications, monitoring traffic. Flo-Gage of accuracy for most industrial processes, particularly suitable for applications that lean, low cost, maintenance, at least with the anti-accidental injury is an important factor. 

 Typical applications include: lube oil monitoring, blending process, water cooling, reverse osmosis systems, and compressed air measurement. 

 Features: 

 2 rugged, embedded metal construction to withstand pipe pressure 
 2 dial does not rupture, scale change mixed / not glazed or reading difficult 
 2 expand the simulation to 270 degrees dial in order to glimpse 
 2 large 3.5 "(90 mm) dial 
 2 applies to transparent and opaque liquids 
 2 measure the 6:1 range, the FS accuracy of ± 3% 
 2 dial shell factory settings for quick installation mode, but if required, on-site re-set is also very easy. 


 Application Note: 

 Mud and suspended solids: 

 In the case of the following four conditions are met, with a uniform suspension of solid particles in liquid can be accurately measure: 
 A) Solid content low enough so that within the liquid performance of the low viscosity liquid properties 
 B) The specific gravity has been fully considered 
 C) solid pressure mark will not be blocked 
 D) friction corrosion flowmeter nozzle. 

 Should not be applied: 

 Flo-Gage, is not recommended in the following services: 
 A) resin, paint, or the formation of the monomer of the pipeline system of solid precipitation 
 B) corrosion of the market most of the synthetic rubber O-ring sealing of the "super solvent" 
 C) Any concentration of D) is easy to produce non-uniform density of the foam 
 E) the need seamless structure in order to achieve synchronous cleaning and sterilization of food and drugs 
 F) should be sealed to the package of toxic substances 
 G) can be viscous liquid affect the flowmeter accuracy at low flow rates (greater than 500Cp (cps)) 
 H) Use of the piston pump pumping system that will produce unstable flow conditions 
 I) under normal operation, the gap is less than the meter differential pressure gravity feed system